Yes, it is a Carrera GT… The interior is almost finished and looks like it has not been bad, my son asked me if it starts…

The wheels are ready … The first thing I did was to drill to mount inflation valves. In this case I used Top Studio valves(ref. TD23115). I removed the “nickel” that brought the wheels because it does not match the real color, which is aluminum, […]

At first I was going to use the dampers that brings the kit, since I was not convinced by the detailing parts from Hobby Design, but at the end I decided to add de details missing in the Hobby Design photoengraved parts. It has been […]

Finally clearcoated… After a few weeks drying, I painted the entire body with bicomponent Number5 clearcoat. Have been four very thin coats of clearcoat following the procedure indicated Number5 in his instructions and after drying a few days this is the result. I have had […]

I replaced the brake calipers and discs that brought the kit by the Hobby Design … and really they earn a lot. The discs are composed of nine photoetched parts, performed with a high level of detail. The brake calipers are resin parts that are […]

Thanks to the reference photos that send me a pair to me of friends, I could see that the exhausts are burned, and taking a slightly darker metallic brown. So it is called on to give that brown tone them and I have tried detail […]

While the paint dries, keep with carbon fiber decals. In this case the passenger compartment, fenders, bottom of the car, diffusers, etc … Thanks to several friends who passed me reference photos as I was told that not all the car had the same type […]

In the last weeks I could not advance so much as I wanted, but in any case the paint shop has opened its doors … I started, sanding the surface of the pieces and gave them a couple of coats of primer, so they were […]